Water based Ink  

Pigment for water based ink

White Paste 1500

Transparent Paste 1500C

Matt White Paste 6100

Matt Transparent Paste 6100C

Elastic White Paste 2300

Elastic Transparent Paste 2300C

Elastic White Paste 2800

Elastic Transparent Paste 588

High Grade Gloss White Paste 1700

High Grade Gloss Transparent Paste 1700C

High Elastic White paste For Nylon 3700

High Elastic Transpare paste For Nylon 3700C       

Pigment for water based ink

1400 White/1400C Transparent
1400 Gloss White Paste
1400C Gloss Transparent Paste

2300 White/2300C Transparent
Elastic Paste For Textile
2300 Gloss Elastic White Paste
2300C Gloss Elastic Transparent Paste

2800 White/588 Transparent (Elasticity)
Environmental Gloss Paste For Textile
2800 Environmental Elastic White paste
588 Environmental Elastic Transparent Paste

1500 White/1500C Transparent
Gloss Paste For Textile
1500 Environmental White Paste
1500C Environmental Transparent Paste

6100  White/6100C Transparent
6100 Environmental Matt White Paste
6100C Environmental Matt Transparent Paste

1700 White/1700C Transparent
High Grade Environmental Gloss Paste For Textile
1700 High Grade Environmental & Elastic White paste
1700C High Grade Environmental & Elastic Transparent Paste
APPLICATION
·T-SHIRTS
·FASHION GARMENTS
FEATURES
SOFT HAND
·CURES WITH OR WITHOUT A DRYER
GENERAL INFORMATION:
It is a Water-based Textile Ink which, will air-cure at room temperature to obtain optimum wash resistance 24 hours after printing. Inks are formulated for printing on cotton, cotton/synthetic blends and many synthetic fabrics. They are not recommended for Nylon or fabrics which are treated with water-repellent coatings. Inks have no flash point and are made from Lead-Free raw materials.
OPACITY:
Inks have good opacity and may be printed on medium-colored grounds. White may be printed as a separate color or may be added for increased opacity and overlays. When air-cured at room temperature, will diminish bleeding effects from synthetic blend garments.
DRYING AND CURING:
Ink will set sufficiently for light stacking within minutes after printing. They will then continue to cure at room temperature. Wash tests should not be carried out until 24 hours after printing. To speed up operations prints may be conveyor-dried at approximately 250F (120C) for 2 minutes.
SCREEN FABRIC:
Monofilament polyester meshes ranging from 80T to 110T are recommended.
STENCILS:
Water-Resistant Photographic Emulsions should be used.
WASH-UP:
Water is used for cleaning screen immediately after printing. Mesh clearer/Detergent, or a commercial detergent containing at least five percent ammonia is recommended where ink may have dried hard in the screen.